I. connection to a tv with a video (cvbs) socket, Antenna connections, Optional connections installation – Philips CDI 615 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPTIONAL CONNECTIONS
INSTALLATION
I. CONNECTION TO A TV WITH A VIDEO (CVBS) SOCKET
' Just connect the corresponding sockets with the supplied video
(CVBS) cable.
' This cable does not connect the audio, which has to be
connected separately.
NOTE
■
Please refer to the instructions that come with the TV set for
selection of the correct input.
2. ANTENNA CONNECTIONS
Connect the player to the TV antenna input, using the
supplied antenna cable.
If you already have a VCR (or antenna or cable TV) connected
to the TV antenna input, connect the CD-i player between the
VCR (or antenna or cable TV) antenna output and the TV
antenna input. You may also use an optional external
switchbox, if desired.
Your CD-i player sends pictures and sound to your TV on the
channel Indicated on the selector switch (6) on the rear of the
CD-i player. This signal is sent through the coaxial cable to the
TV.
To operate the player with your TV, tune your TV to the same
channel that the selector switch is set to on the rear of the
CD-i player..
Since your CD-i player has a channel selector (6), located at the
rear of the unit, you can avoid local interference by tuning to a
different channel.
CHANNEL
SELECTOR
C H 3 j j
CHS
O O
(ANTENNA or CABLE INPUT
or VCR OUTPUT) _____________
---------------——DB8EE3----
7SQ
O—CEEJ«J
RF COAXIAL CABLE
NOTE
The sound sent through the RF output to your TV is mono
only (not stereo).
Please refer to the instructions that came with the TV-set for
the selection of the proper channel.
11