Philips CDI 615 - Manual (Page 10)

INSTALLATION STANDARD CONNECTIONS
I . CONNECTION TO A TV WITH A Y/C (S-VIDEO) SOCKET
• Just connect the corresponding connectors with the supplied Y/C
cable.
' As this Y/C cable does not connect the audio, the audio has to
be connected separately.
NOTE
Please refer to the instructions that came with the TV set for
selection of the correct input.
IN
•H-
ED
:
i
i O O GZ? i
®©
C ' !• • • ©
Y/C
(S-VlDEO)
CABLE^^i
--
2. AUDIO CONNECTIONS
If required, you can connect the player’s audio output (see
10,11 page to the input of your HiFi system with an
optional audio cable.
CAUTION
DO NOT CONNECT THE PLAYER’S AUDIO OUTPUT (10,11)
TO THE HIFI PHONO (RECORD PLAYER) INPUT.
3. POWER CONNECTION
• Connect the female end of the supplied AC (alternating current)
cord into the AC socket (15) at the rear.
• Insert the male end of the cord into an AC outlet.
CAUnON
NEVER MAKE OR CHANGE CONNECTIONS WITH THE
POWER SWITCHED ON.
ONLY A QUALIFIED SERVICE PERSON SHOULD REMOVE
THE COVER OR ATTEMPT TO SERVICE THIS DEVICE.
USE OF CONTROLS OR ADJiUSTMENTS OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE OR OTHER UNSAFE CONDITION.
THE PLAYER AUTOMATICAIXY ADJUSTS TO THE LOCAL
MAMS VOLTAGE.
WHEN THE PLAYER IS M “STANDBY” OR “OFF” MODE, TT IS
STnX CONSUMMG SOME POWER. IF YOU WISH TO
DISCONNECT YOUR PLAYER COMPLETELY FROM THE POWER
SOURCE, WITHDRAW THE PLUG FROM THE AC OUTLET.
10