Philips FW-R55 - Manual (Page 22)

External recording
Analog or digital recording?
When making recordings from an external source, we
recommend doing analog recording only If digital recording
Is not possible, Digital recording will usually result in better
sound quality.
Automatic track increment
When the digital input for recording from a digital
source (e.g. CD player) is used, tracks will be incremented
automatically such that the track numbers are positioned on
the same position as on the original. When the analog input
for recording from a digital or analog source is used, track
increment will not take place automatically unless one of the
following settings is selected.Track increments may not always
be positioned correctly, depending on the quality of the
source material.
Press TRACK INCR, as often as necessary on the remote
control during stop to switch through the following
automatic track increment functions:
-» MRM u R l : for switching the function off
-» iuRrMTRBuli: for optimal recording from noisy sources like
turntables (It is not possible to connect a turntable
directly to AUXICDR IN UR - see "Analog audio
connections”)
ÍRPR/Í u MI l R: for optimal recording from a tape
HJj/Ili'II: for optimal recording from high quality sources
like DAT, DCC or DVD
Notes:
Track numbers can be incremented manually by pressing
TRACK INCR. on the remote control during recording. The
minimum track length is 4 seconds.
Track numbers cannot be changed after recording.
Recording with automatic start
Recording of an entire disc or a track
Insert a CDR(W) that is absolutely free of scratches and
dust particles into the CD recorder tray.
Press AUX repeatedly to select the input for the external
source you want to record from.
-»Ru" TIRITRLithe digital input is selected.
-* Ru'/'i R'MR lu G R:the analog input fora standard level
source is selected.
-►Rl
is selected.
RMRLuG L: the analog input for a low level source
3 Press RECORD on the unit to enter the recording menu,
4 Rotate M JOG CONTROL M to select either:
-» RuL l T?: for recording with synchronised start of an
entire disc
-» RLOi TRRTK ?: for recording with synchronised start of a
single track
5 Press YES to confirm your selection.
?,rc;o P! PM nn r!;rgfJijp,i pnuRpg is scrolled.
6 Start playback on the external source you want to record from,
-» The CD recorder starts to record simultaneously and
RECORDING IN SESSION is shown.The remaining
recording time on the CDR(W) is displayed.
Note: If you start playback on the selected source within a
track, recording will start at the beginning of the next track.
7 If a digital source is selected:
After the recording process, the CD recorder stops
automatically
Note: Recordings from DAT, DCC or DVD will automatically
stop after 20 seconds of silence.
If an analog source is selected:
At the end of the recording process, the CD recorder
stops after a silence of 20 seconds on the source material.
• To stop recording manually press ■ on the unit.
•* RECORDING IN SESSION gOeS off.
Manual recording
Recording from an external source
1 Insert a CDR(W) that is absolutely free of scratches and
dust particles into the CD recorder tray.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
-» Ru'li ITijITRL:the digital input is selected.
■ RU;: RMRL :the analog input for a standard level
3
4
source is selected.
-» Ru'T Rl'JRLuR L : the analog input for a low level source
is selected.
Press RECORD on the unit to enter the recording menu.
Rotate M JOG CONTROL W to select the type of recording:
-» Ru r iRIMuRL ?: for manual start of recording
Press YES to confirm your selection.
-» PRTPRRIMG is displayed,
-» RE llj RI j R.R u -'; and the remaining recording time of the
CDR(W) are displayed.
Start playback on the external source in order to set the
optimal recording level on the CD recorder (see “Adjusting
the record level”).
Stop playback on the external source.
Go to the beginning of the desired track.
Press YES on the unit and start playback on the external
source at the same time.
-» The CD recorder starts to record and recording in
SESSION is shown.The remaining recording time of the
CDR(W) is displayed.
Note: IfCHCrk IhlPLIT is flashing, check the digital connection.
10 Press
■
on the unit to stop recording.
-» uPURTr is displayed and recording in session goes off.
7
8
9
22