Philips CDC 745 - Manual (Page 7)

INSTALLATION CONTROLS
W
D)
c
LU
ACCESSORIES (Supplied)
Standard items:
Remote control transmitter (1x)
Batteries (2x AAA size) for remote control
transmitter
INSTALLATION
Unpack all parts and remove protective material.
Insert the batteries into the remote control
transmitter, as shown in the battery compartment.
Do not connect the unit to the mains before
checking the mains voltage and before all other
connections have been made. Power cord.
Do
nof connect the unit to the power without having
checked whether the voltage given on the type
plate corresponds with the local AC outlet voltage.
If not, please consult your dealer. The type plate
is located on the rear of the unit.
Always remove the CDs from the tray before
moving the unit.
CONNECTIONS
A) MAINS CONNECTION
• Connect the mains lead to your main supply.
B) CONNECTING CABLE TO THE AMPLIFIER
• Insert a red plug into the 'R' socket and the other
plug into the 'L' socket.
• Insert the two other plugs into the corresponding
sockets of the CD or AUX input of your amplifier.
You can also use the TUNER or TAPE IN
connection, but nof the PHONO input!