Philips CDC 745 - Manual (Page 13)

PROGRAMMING
• Press SCAN again or PLAY*REPLAY if you
want to play the complete track.
Random Play
All the tracks of the five CDs can be randomly played.
• Press SHUFFLE on the main unit (or on the
remote controi) before or during play.
- The display shows SHUFFLE and play starts
with a track which has been randomly se­
lected.
- When one track finishes, another track is
randomiy selected from those which have
not yet been played.
- During piay you can use NEXT CH to select
another random track, or W PREVIOUS to
play the same track again.
• Press SHUFFLE again if you wish to return to
normai play.
All the tracks in one CD can be randomly played.
• Select the number of the desired CD using DISC
SELECT or press DISC on the remote control.
• Press SHUFFLE on the main unit (or on the
remote control) before play.
- The display shows SHUFFLE and DISC;
playback starts with a track which has been
randomly selected.
- When one track finishes, its number disap­
pears from the display and another track is
randomly selected from those which have
not yet been played.
• Press SHUFFLE again if you wish to return to
normal play.
Programming
By programming the player, you can play up to 30
tracks in any desired order. If you exceed the maxi­
mum of 30 tracks, 'FULL' will appear in the dispiay.
• Press PROGRAMtoactivatethe Program mode..
- PROGRAM flashes andlPROGRAMl appears
on the display, and select the number of the
first desired CD using DISC SELECT on the
unit or press DISC on the remote control.
• Using the 0-9 digit buttons, key in the desired
track numbers of the CD.
- Every track numbers you enter wili be in­
cluded immediately in the program.
- The display always shows the track number
and the number of tracks in your program.
• If you wish to store Iracks from another CD,
select the number of the CD.
- flashes indicating the CD being se­
lected.
- Repeat the above procedure to program
the desired tracks in the second CD.
Reviewing the program
• Press REVIEW prior to, during or after
programmed play.
- The review of the tracks currentiy pro­
grammed will begin in sequence.
Err will light up if there is no program stored.
With REVIEW you can proceed more rapidly to the
next block of information.
Playing a program
• Press PLAY'REPLAY.
- Playback starts with the first track of the
program.
- When ali tracks have been played, the dis­
play shows the number of tracks of the
program.
During programmed play, the EDIT, PROGRAM and
CANCEL functions will not worked.
Search for a particular passage is oniy possible
within the track being played.
Erasing a program
A program is erased if you:
- Press STOP*CLEAR twice,
or
- Press OPEN'CLOSE on the unit,
or
- Switch the unit off.
Erasing a track from the program
• Press REVIEW before or after programmed play
at STOP mode.
- The review of the tracks currently pro­
grammed will begin in sequence.
• Press CANCEL as soon as the number you wish
to erase appears.
-
The number has now been erased.
Err will light up if there is no program stored and if
you have not pressed REVIEW first before cancel­
ling.
EDIT
The EDIT function has a recording mode (EDIT) and
a play mode (I timer editi ).
- In the EDIT mode you can store the recording
time of the tape in the changer memory. This will
determine which tracks fit on one side of the tape
and will stop automatically after the last track.
- In the TIMER EDIT mode, you can store a
desired playing time. If necessary, the CD orthe
program you wish to play will be partly repeated
to fill the entered time.
w
ro
c
lU
11