Philips CDC 745 - Manual (Page 11)

PLAYBACK
REM(aining) TRACK TIME
Indicates the remaining piaying time of the track
being piayed.
TOTAL REM(aining) TIME
- Indicates the remaining playing time of the entire
CD
TOTAL TIME
-
Indicates the total playing time of a CD.
AUTOSPACE
- Lights up when an extra pause is inserted
between the different tracks in the EDIT and CD
DUBBING mode.
PAUSE
- Lights up when playback is interrupted.
I
edit !
- Lights up when the player is in EDIT mode
I TIMER EDITI
- Lights up when the changer is in TIMER EDIT
mode
1-15 tracks number indicator
- Indicates the numbers of tracks on a CD.
+15
- Lights up when there are more than 15 tracks on
the CD.
NO DISC
- Lights up when there are no CDs in the CD tray.
E r r
-
Lights up when you make a mistake while
operating the changer.
- Flashes when a CD's contents list is being
scanned.
INSERTING THE DISCS_________________________
• Press POWER STANDBY/OFF to switch the
changer on.
- The changer will start to scan the CD to
check how many CDs there are in the CD
tray. The tray will rotate slowly until all the
pockets in the CD tray have been checked.
- After CD detection the display will show the
number of CDs in the CD tray (X disc).
• Press OPEN'CLOSE on the changerto open the
CD tray.
- "OPEN" will appear on the display.
• Insert the CDs, printed side up in the tray.
• Press the LOAD button to rotate the pocket in the
CD tray.
• Close the tray by pressing OPEN-CLOSE
- "CLOSE" will appear on the display.
- The changer will start to scan the CD to
check how many CDs there are in the CD
tray. The tray will rotate slowly until all the
pockets in the CD tray have been checked.
- After CD detection the display will show the
number of CDs in the CD tray (X disc).
Notes:
• Use the PREFERRED POSITION in the CD tray
if you wish to play only one CD. Playback will
start from the first track of the disc in the
preferred position by pressing the QUICK PLAY
button..
• During the scanning of the CD, it is advisable not
to press any buttons as the CD will stop scanning
immediately and the display will give an incorrect
indication of the numbers of CDs in the CD tray.
PLAYBACK (PLAY-REPLAY)________________________
• Press PLAY-REPLAY on the unit or PLAY on the
remote control.
- ----------------- flashes and playback of DISC
1 will begin.
) will start to flash in the display indicating
the disc that is being played (^j)). Shortly
afterwards the first track of the chosen disc will
start to play. The disc position indicator (if DISC
1 is chosen, ^ flashes) and the track number
indicator (1-15) shows how many tracks are on
the CD, when a track has been played, its
number disappears.
- flashes to indicate the playback of DISC
1, and the display shows the current track
number and its elapsed playing time. The
track being played is always shown under
TRACK, and its elapsed playing time is
shown under TRACK TIME.
- When all the tracks have been played, the
CD player stops, and the total number of
tracks and total playing time of the last CD
played are shown on the display.
To stop playback, press STOP-CLEAR □ on the
unit or STOP on the remote control.
To interrupt playback, press PAUSE DO on the unit
or PAUSE on the remote control. PAUSE lights
up.
To resume playback, press PLAY-REPLAY on
the unit again or PLAY on the remote control.
If you press PLAY-REPLAY during playback,
the current track will start again from the
beginning.
Press POWER STANDBY/OFF to switch the
player off.
£
W
D)
C
III