Philips STU909 - Manual (Page 19)

Installation
Programmes can be found via an automatic search or via DIRECT
FREQUENCY ENTRY (Setting the output frequency of the LNC in MHz).
Direct Frequency Entry:
O Press 4 (or 3 if dual-band LNC is ‘NO’).
> The DIRECT FREQUENCY ENTRY menu appears on the screen.
O By using 0-9 the output frequency of the LNC can be entered directly (only the
first three digits).
O Press MENU.
I> The FIND PROGRAMMES menu appears on the screen.
System recognition Is performed automatically (D2-MAC or PAL).
Misinterpretation can occur with scrambled signals.
Manual override is possible:
DIRECT FREQUENCY ENTRY
FREQUENCY: 1-0 MHZ
SELECT: 0-9, menu, off
FIND PROGRAMMES
1 LNC FREQ. BAND >
2 POLARIZATION SETTINGS
3 SEARCH 1.055 GHZ
4 DIRECT FREQUENCY ENTRY
5 SYSTEM
>D2-MAC<
6 DESCRAMBLER SETTINGS
select: 1 - 6, +, menu, ctf
O Press 5 (or 4 if dual-band LNC is ‘NO’).
C> Select D2-MAC or PAL by - or +.
External PAL Decoders/Descramblers can be connected to the Decoder/
Descrambler socket. See the enclosed booklet ‘Connecting descramblers and
Pay-TV decoders to your Philips Satellite receiver’.
To change the setting
O Press 6 (or 5 if dual-band LNC is ‘NO’).
I> The DESCRAMBLER SETTINGS menu appears on the screen.
O Press 1.
O Select AUDIO INTERNAL, EXTERNAL or AUTOMATIC by using - or +.
O Press 2.
O Select VIDEO INTERNAL, EXTERNAL or AUTOMATIC by using - or +.
Note:
Internal means audio/video processing in receiver.
External means audio/video processing via external decoder/descrambler.
Automatic means that a connected decoder/descrambler can switch
automatically if this box recognises the signal.
O Press MENU
> The FIND PROGRAMMES menu appears on the screen.
O Press MENU.
I> The PROGRAMMES menu appears on the screen.
For PAL programmes
DESCRAMBLER SETTINGS
1 AUDIO
2VIDEO
> INTERNAL <
> AUTOMATIC <
select: 1 - 2, +, menu, off
For D2 MAC programmes
DESCRAMBLER SETTINGS
> INTERNAL <
select: menu, off
For PAL programmes
PROGRAMMES
1 RND PROGRAMMES
2 PROGRAMME UST
3 SOUND PREFERENCE
4 STORE
select; 1-4, menu, off
Before you can store the selected programme, you need to:
- Allocate this programme to a programme number.
- If you require, enter the programme name.
- Select the preferred sound channel for this programme.
- Activate noise reduction if required (for D2-MAC only).
For D2 MAC programmes
PROGRAMMES
1 RNDPROGRAMMES
2 PROGRAMME UST
3 SOUND PREFERENCE
4 NOISE REDUCTION RLTER
5 STORE
select: 1 - S, menu, off
19