Installation of a ratable dish antenna, Installation – Philips STU909 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation of a ratable
dish antenna
Installation
Your STU 909 multi standard satellite tuner is equipped to automaticaily
control a rotable dish antenna.
The automatic antenna positioner (i.e. SCC 209) can be connected to
connection 22 as indicated in the drawing beiow.
SCC 209
Before you can select the satellite programmes, make sure that the
configuration (see section 6) is in accordance with your equipment.
- ANTENNA POSITIONER: YES
- NUMBER OF DISHES: 1
- Set the LNC and Polariser types information as described above.
- Make sure that the antenna positioner (i.e. SCC 209) is connected properly
and switched ON.
Note:
Make sure that your dish antenna is connected to input 5^ 1.
After placing your rotable dish you must first set the rotation limits
(see section 6: Rotation Limit, East-West)
To aiign the dish and set sateiiite positions, please refer to the instruction
manual of the antenna positioner.
17