Cassette – Philips AQ 4150 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Cassette
CASSETTE RECORDER
RECORDING
Copyright
Recording is permissible insofar as copyright
or other rights of third parties are not infringed.
Fast winding and rewinding
Press fast forward wind F.FWD ■« or
REWIND ►>• button. To stop, press STOP ■.
Safeguarding a cassette against erasure
Keep the cassette side to be
safeguarded in front of you and
break out the left tab.
Now, recording on this side is no
longer possible.
L/>« ♦ -
a
J
CASSETTE PLAYBACK
Set the TAPE/RADIO selector to TAPE.
Press EJECT ■ and insert a cassette.
For playback, any cassette type can be
inserted.
To start playback, press PLAY ◄.
Adjust the sound with the controls VOLUME
and TONE.
You may connect stereo headphones with
3.5 mm plug to socket O. The loudspeaker is
then muted.
To stop, press STOP ■. The set is then
switched off. On pressing again, the
cassette holder will open (EJECT).
When the end of the tape is reached, the
recorder buttons are released.
• Press EJECT ■ to open the cassette holder.
• Insert the cassette.
• For recording you must use a
NORMAL cassette (lEC I) on
which the tabs are not removed.
- At the very beginning of the
tape, no recording will take place during the
first 7 seconds when the leader tape passes
the recorder heads,
• When monitoring during recording, adjust
the sound with the controls VOLUME and
TONE. These controls do not affect the
recording.
Recording from the radio
• Set the TAPE/RADIO selector to RADIO,
Microphone recording
• Set the TAPE/RADIO selector to TAPE,
• Set the VOLUME control to zero (during
microphone recordings, monitoring is not
possible).
Starting and stopping the recording
• To start recording, press RECORD •; in
doing so, PLAY < is pressed too.
• For brief interruptions, press PAUSE
II.
Press again to restart recording.
• To stop, press STOP ■. On pressing again,
the cassette holder will open (EJECT).
- When the end of the tape is reached, the
recorder buttons are released.
• The set is switched off if TAPE/RADIO
selector is in position TAPE and the recorder
buttons are released.