Ip d, Installation – Philips AQ 4150 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Installation
TAPE/RADIO
HEADPHONES ri
CASSETTE KEYS
MICROPHONE
_ BATTERY
COMPARTMENT
SUPPLY
Battery supply
• Open the battery compartment and insert as
indicated four batteries, type R20, UM1 or
D-cells.
Mains supply
• Check if the mains voltage as shown on the
model number plate (on the base of the set)
corresponds to your local mains voltage. If it
does not, consult your dealer or service
organisation.
• If the set is equipped with a VOLTAGE
SELECTOR, set this selector to the local
mains voltage.
Remove the batteries if exhausted or if they
will not be used again for a long period.
The battery supply is switched off when the
set is connected to the mains. To change
over to battery supply, pull out the plug from
the MAINS socket.
VOLTAGE
MAINS
IP d©
Connect the mains lead to the MAINS
socket and the wall socket. The mains
supply is switched on. To disconnect the set
from the mains completely, withdraw the
mains plug from the wall socket.
The model number and production number are
located on the base of the set.
This product complies with the radio
interference requirements of the European
Community.