Philips AQ 4150 - Manual (Page 4)

(D España
Firma;
Nombre.
Cargo C.S. Lau
Quality Manager
(DK) Danmark
Declaración de conformidad con normas
El que suscribe, en nombre y representación de;
Business Unit Portable Audio,
Division of Philips China
Hong Kong Group Company Ltd.
declara, bajo su propia responsabilidad, que el
equipo; Radio casete
fabricado por; BUPA Hong Kong
en:
Far East
marca: Philips
modelos: AQ4150
objeto de esta declaración, cumple con la normativa
siguiente: Reglamento sobre Perturbaciones Radio-
eléctricas, Real Decreto 138/1989, Anexo V.
Hecho en: Hong Kong, 01-12-1994
Typeskiltet er piacerei pà apparatens bagside
Dette produkt overholder kravene til radio-
interferens af Europaeisk Fsellesskab.
Bemaerk: Netafbryderen er sekundccrt inkob-
let og afbryder ikke strommen fra nettet. Den
indbyggede netdel er derfor tilsluttet til lysnet-
tet sa laenge netstikket sidder i stikkontakten.
® Norge
Typeskilt finnes pà apparatens bakside.
Observen Nettbryteren er sekundert
innkoplet. Den innebygde netdeien er derfor
ikke frakoplet nettet sa lenge apparatet er
tilsluttet nettkontakten.
Important notes for users in the U.K.:
Mains plug
This apparatus is fitted with an approved moulded 13 Amp plug To change a fuse in this type of
plug proceed as follows
• Remove fuse cover and fuse.
• Fi;; new fuse (5 Amp) which should be a BS1362, A S T A or BSI
approved type.
• Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should bo cut off
and an appropriate plug fitted in its place
If the mams plug contains a fuse, this should have a value of 5 Amp. If a
plug without a fuse is used, the fuse at the distribution board should not be
greater than 3 Amp
Afofe.'The severed plug must be disposed to avoid a possible shock hazard should it be inserted
into a 13 Amp socket elsewhere.
How to connect a plug
The wires in the mams lead are coloured with the following code blue = neutral (W), brown =
live (U
As these colours may not correspond with the colour markings identitymg the terminals in youi
plug, proceed as follows
• Connect the blue wire to the terminal marked M or coloured black
• Connect the brown wire to the terminal marired L or coloured nad
• Do not connect either wire to the earth terminal m the plug, marked E (or e) or colouied green
(or green and yellow)
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of
the lead - not simply over the two wires
Copyright:
Recording and playback of material may require consent. See Copyright Act 1956 and The Per­
former's Protection Acts 1958 to 1972