Notes – Philips SRP1003WM/17 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Notes
When replacing the batteries, all user
settings will be retained in the remote
control memory for 5 minutes.
The remote control automatically turns
off if buttons are pressed for more than
30 seconds.
This will save your batteries in case the
remote control gets stuck in a place
where the buttons remain pressed (e.g.,
between the sofa cushions).
Some buttons on the remote control
might have functions that are referred to
by different names on the device you are
controlling.
E.g., GD may be called Recall, Back,
Previous Program, Previous Channel,
Jump or Repeat.
These differences depend on the brand
and model ofyour device.
Also, this remote control can only
operate features that exist on your
device.
E.g., your device must have Previous
Channel ability for the^) button to
operate this feature.
The Record (0) button must be pressed
twice to record. For some brands of DVR,
you might need to press the Record (0)
button once, then press it again for three
seconds.
EN
P1003WM_17__Manual_80_210.indd 3
25-11-09 13:1