Philips SRP1003WM/17 - Manual (Page 10)

Note
You can store any kind of code under any
mode (exceptQ^). For example:
you can store a DVR code under the^lD
button, or a CBL code under the^§)
button, etc. However, you can only store TV
codes under the^vl button.
Ifyou^Wish to store a DVR code under e.g.
the^5 button:
• Follow the procedure for‘Direct code
entry’ (chapter 2.2.2 ) and press^jt) in
step 3 .
• Enter any DVR code in step 4 .
• Then follow steps S and 6 .
2.3 Programming combo devices
For combo devices, in many cases a single code
operates both parts ofthe device (e.g.TV and
DVD). In other cases you need to set up two
codes. For example, ifyou have aTV/DVD combo,
you need to set up one code under the^v~)
button to control the TV part and a separate
code (underthe^it] or^S) button) to
control the DVD part.
2.4 Copy Volume/Mute buttons
from another device
When setting the remote control up for your
devices, the remote control copies the
Volume/Mute settings as follows:
• Ifadevicehasitsown Volume/Mute
buttons in the remote control database,
then these buttons will be used.
• Ifa device has no Volume/Mute buttons in
the remote control database, the Volume/
Mute buttons (+VOL -^^) of the TV will
be used automatically.
You can change which Volume/Mute buttons
are used for a device.
10 EN
P1003WM_17__Manual_80_210.indd 10 25-11-09 13:1