Example, Notes, Controlling combo devices – Philips SRP1003WM/17 User Manual
Page 16: 2 controllingcombodevices, 2 controlling combo devices
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Press and release
the Power ^D)
button to turn OFF
the device.
Example
After setting up the remote control to
operateyour RCATV,theTV does notturn
ON when you press the Power
№!D) button. In this case the Power ^D)
button only turns OFF the TV.
•
To turn ON the TV: press the^^
button for more than 1 second.
•
To turn OFF the TV: press the Power
^D) button.
Notes
This method can be applied similarly to
any device and is available for all device
modes.
Note that this feature is not supported
by all codes.
4.2
Controlling combo devices
Some combo devices (e.g.TV/DVR,TV/DVD,
DVD/DVR, etc.) have separate buttons on the
original remote control to select the part of
the combo device to be controlled.
For example, if your combo device is aTV/DVD
then its original remote control might have
separate TV and DVD buttons for selection
ofthe combo part you wish to operate.The
equivalent button functions can be found on
your Philips remote control by using the device
mode
(
cbl
|
or^^) and^^ buttons.
Example forTVIDVD combo, programmed under
DVD mode.
1
Set up the remote control for a device (in
this example TV) as described in chapter
2.2.1
‘Code search by brand’.
16 EN
P1003WM_17__Manual_80_210.indd 16
25-11-09 13:1