Button functions, 1 general functions, Zone 1 – Philips SRP1003WM/17 User Manual
Page 12: Note, Zone 2, Buttonfunctions, 1 generalfunctions
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Button functions
The illustration on page 4 gives an overview of
all buttons on the remote control.
Try out the buttons you need for operating
your devices.
3.1
General functions
Zone 1
(INPUT) (SETUP]
INPUT
SETUP..
..Selects available
source inputs
(Antenna, Cable, etc.)
..Used for setting up
the remote control.
Red light
Indicator ^)........................ Lights up when any
button is pressed.
Power ^^^).........................Turns devices
On/Off.
Note
For some devices of certain brands, the
Power ^!)~)) buttononlyturnsthedevice
OFF.
In order to turn the device ON, press any
ofthe digit buttons or follow the procedure
described in chapter 4.1.
Zone 2
(Tv~) (S
l
) (
wd
)
Device Mode......................Select device to be
operated.
buttons
Zone 3 (Outer ring)
GUIDE.
..Displays on-screen
program or channel
guides.
12
EN
P1003WM_17__Manual_80_210.indd 12
25-11-09 13:1