2 dedicated dvd functions, 3 dedicated cable/sat functions, Using the remote control – Philips SRP1003WM/17 User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ENTER..
..Used after direct
channel number
selection to
immediately change
to the selected
channel.
■■Selects between
one and two-figure
channel numbers.
3.2
Dedicated DVD functions
• INPUT
..Activates the DVD player’s
Setup menu.
• CH + / -................ Selects next/previous
chapter or track on a disc.
3.3
Dedicated Cable/SAT functions
' INPUT ^
ut
)) ..SelectsTV or SAT input.
' 4P and P3............Select previous/next on
screen guide menu.
'
.................... Thumbs Up/Down. Setyour
Thumbs ratings.
Using the remote
control
4.1
Controlling devices requiring
separate Power On/Off
buttons
Some devices (e.g. certain RCA TVs) require
separate Power On and Power Off buttons to
turn the device ON and OFF.
The equivalent button functions can be found
on your Philips remote control.
1 Turn ON the
device by pressing
the corresponding
Mode button
(
cbl
) or^D))
for more than
1 second.
EN 15
P1003WM_17__Manual_80_210.indd 15
25-11-09 13:1