Interlogix 5820A Series - Manual

Description Model No. Color Listing
ShatterPro ™ II EZ, tamper, latch or non-latch LED 5812EZ-W White UL
ShatterPro ™ II EZ, tamper, Form C, latch or non-latch LED 5815EZ-W White ULC
ShatterPro ™ II, tamper, latch or non-latch LED 5812A-W White UL
ShatterPro ™ II, tamper, Form C, latch or non-latch LED 5815A-W White ULC
Recessed ShatterPro ™ II, latch or non-latch LED 5820A-W White
Recessed ShatterPro ™ II, tamper, latch or non-latch LED 5822A-W White UL
Single Gang Box ShatterPro ™ II 5825A-W White
Single Gang Box Kit for Recessed ShatterPro ™ II 5829A-W White
Hand-held Tester, for testing effective range 5709C-W White
SENTROL
ShatterPro ™ II Advanced Acoustic Sensor with Pattern Recognition Technology ™
Protected under U.S. Patent 5,192,931 and 5,510,767
Installation Instructions for Recessed and Surface Mount Models
WIRING
+
– N.C.
COM
TAMP
TAMP
spring clip for
latching LED
Strip back the outer jacket on your wiring cable. This will allow wires to flex in the case. Make sure the cable is slack in the wall to
avoid stressing the wires at their connections.
5812EZ-W
5812A-W
5820A-W and 5822A-W
NOTE: When wiring the
5822A, the tamper is in series
with the alarm loop. There is
insufficient room for a separate
set of terminals for the tamper.
Surface Mount ShatterPro™ II
5812EZ
SENTROL
Surface Mount ShatterPro™ II 5812A
Recessed ShatterPro™ II 5820A
spring clip for
latching LED
+
– N.C.
COM
TAMP
TAMP
NO
5815EZ-W
5815A-W
+ −
Loop
Cut for latching LED
ORDERING INFORMATION