Interlogix Concord 4 User Manual - Manual (Page 79)

Concord 4 User Manual 77
Accidental smoke and fire alarms
To silence the alarms and reset the sensor:
1. Press code or 1, code, once to silence the alarm.
2. Press 1, code, again to reset the smoke alarm.
Smoke and fire panic alarms cannot be cancelled and are always reported to the
central station. If, after disarming the system once, the system still thinks a
sensor is open, disarm the system again.
In the event of an accidental smoke or fire alarm, follow these dealer instructions:
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________
Resetting the smoke detector
To reset smoke detectors:

They are reset automatically.
 Press the reset switch.
 Enter the disarm command twice.
Dialer abort
I have __________ seconds to cancel an accidental intrusion or auxiliary alarm
before it is reported to the central station.