Interlogix Concord 4 User Manual - Manual (Page 53)

Concord 4 User Manual 51
Event Display
Partition Curre
nt
arming
level Zone
Bus unit numb
e
r
Source
1
User
2
Zone supervisory SUPERVISORY X X
Zone tamper TAMPER X X
Zone trouble TROUBLE X X
Zone trouble restoral TROUBLE
RESTORAL X X
Zone unbypass UNBYPASSED X X X
1. Source information is shown only if the information was available when the event was
buffered.
2. User information is shown only if the information was available when the event was
buffered.
3. Line two of the display also contains P-C, where P is the previous arming level and C is
the current arming level.
Table 8 below shows user information.
Table 8: User information
Detail screen display User
U001 to U096 Wireless touchpad or key fob
U600 to U829 Regular user codes 000 to 229
U830 to U835 Partition master codes 1 to 6
U838 to U843 Partition duress codes 1 to 6
U846 System master code
U847 Installer code
U848 Dealer code
U849 AVM code
U850 Quick arming
U851 Keyswitch arming
U852 System
Table 9 below shows source information
Table 9: Source information
Detail screen display Source
S00 Premise phone
S01 Phone during conversation
S02 Remote phone