Interlogix Concord 4 User Manual - Manual (Page 60)

58 Concord 4 User Manual
4. Press B until the touchpad displays the user code you wish to delete, and
then press #.
5. Enter the system or partition master code you used in Step 1, and then press
#. The deleted code appears as USER 04 **** or RG 01 ----, for
example.
6. Press *, B to move to the next user code, or press *, 00, # to exit the
programming menus.
To change or delete the partition master code:
1. Enter the programming menus by pressing 9, system or partition master
code.
2. Press B until the touchpad displays USER CODES, the press #. The touchpad
displays REGULAR USER CODES or REG CODES.
3. Press B until the touchpad displays PARTITION MASTER CODE or PTN
MASTER , and then press #.
4. Enter the system master code to delete the partition master code, or enter a
new 4-digit partition master code to replace the existing code, and then press
#.
5. Press *, 00, # to exit the programming menus.
To change the system master code:
1. Enter the programming menus by pressing 9, system master code.
2. Press B until the touchpad displays USER CODES, the press #. The touchpad
displays REGULAR USER CODES or REG CODES.
3. Press B until the touchpad displays SYSTEM MASTER CODE or SYS MASTER,
and then press #.
4. Enter a new 4-digit system master code to replace the existing code, and then
press #.
5. Press *, 00, # to exit the programming menus.
Programming shortcuts
A programming shortcut is a number that “jumps” you to a particular spot in the
programming menus. A series of shortcut numbers takes you directly to the
feature you want to change.
To use the programming shortcuts:
1. Enter user programming:
Local phone. Press #, 9, code.