IC Realtime 600TVL / 650TVL 36X High Speed PTZ Camera with 260ft - Manual (Page 34)

27
IR SENSITIVITY: 4
IRLIGHT CTRL: ZOOM PRI
NEAR LIGHT: 50
FAR LIGHT: 50
IRLIGHT COMP: 03
BACK
EXIT
Move the cursor to highlight IR LIGHT SETTING button and then click confirm button.
IR SENSITIVITY: Here you can enable the IR light sensitivity function.
SWITCH ZOOM: It is the zoom rate of the near light, and far light.
IRLIGHT CTRL: There are three options: Zoom rate has the higher priority, height has the higher priority,
manual.
NEAR LIGHT: It is the medium and near light brightness.
FAR LIGHT: It is the far light brightness.
IR LIGHT COMPENSATION: It is the whole compensation level of the IR light.
4.5 Dome Abnormal Phenomenon Operation
4.5.1 Restore to Factory Default Setup
From main menu-> SYSTEM INFORMATION, move cursor to FACTORY DEFAULT and click confirm button.
Dome will reboot and all the setups restore to factory default setup.
4.5.2 PTZ Movement is not smooth
From menu to SYSTEM INFORMATION, move cursor to RESTART and click confirm button. This reboot
will not modify all activated setup (such as preset, tour and pattern)