IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 77)

68
Figure 4-72
4.7.11.3 Remote Device
In the main menu, click the Remote Device icon to go to the corresponding interface. See Figure
4-73.
Figure 4-73
The remote device interface is shown as in Figure 4-74.
IP search: Click it to search IP address.
Add: Click it to connect to the selected device and add it to the Added device list. Support
Batch add.
Show filter: You can use it to display the specified devices from the added device.
Edit: Please refer to manual add button.
IPC config: Double click the on the IPC config column, you can go to the IPC setup
interface. See Figure 4-75.
Gain mode: It is to set video noise. Check Auto, system automatically sets video gain.
Check Manual, you can set gain threshold, brightness and etc.
Gain threshold: Here is for you to set gain value. The different series product has
different default values. The lower the value is, the lower the noise is. But the video
brightness may become too dark under the low illumination. If the value is high, it can
enhance the video brightness under the low illumination, but the video noise may
become high.