IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 76)

67
Schedule
RS232
Network
Alarm
Detect
Pan/tilt/zoom
Display
Channel name
Remote device
Please highlight icon to select the corresponding function. See Figure 4-71.
After all the setups please click OK button, system goes back to the previous menu.
Figure 4-71
Warning!
System menu color, language, time display mode, video format, IP address, user account will not
maintain previous setup after default operation!
4.7.11 Remote Device
Important
Do not connect the switch to the PoE port, otherwise the connection may fail!
4.7.11.1 UPNP
Please connect the IPC to the PoE port of the device rear panel, system can auto connect to the
network camera.
4.7.11.2 Built-in Switch Setup
The built-in switch function is for product of PoE port.
From Network->Network Server->Switch, you can set switch IP address, subnet mask, gateway
and etc. See Figure 4-72.