IC Realtime 4 Channel PoE Mobile Network Video Recorder - Manual (Page 31)

22
video of multiple-channel at the same time.
Current selected backup channel has an icon as
and the free channel is shown as an icon
as .
Once the backup started, you can see the free
channel is shown as an icon as .
4 Manual Snap Click it to snap manually.
5
Remote device add
shortcut
It is to go to the remote device connection
interface.
6 Exit
Playback control
The playback control has the following features.
Support play, pause, and exit and drag function.
During the preview playback process, you can not see the channel title and record status
of current channel. It will display the channel title and the record status once you exit the
preview playback.
During the preview playback, you can not switch the displayed channel or change current
window-display mode.
Please note, the tour function has the higher priority than the preview playback. System
automatically exits the preview playback function and its corresponding interface when
the tour function started. You can not control the preview playback until the tour function
ended.
4.2 4.2 4.2 4.2 Navigation Bar Navigation Bar Navigation Bar Navigation Bar
The navigation bar is shown as in Figure 4-4.
Figure 4-4
① Main Interface: Click it to go to main menu interface.
② Window split: Here you can select 1/4-window output mode. Please click one button and
then select the corresponding channel(s).
③ PTZ: Click it to go to the PTZ operation interface. Please refer to chapter 4.7.8for detailed
information.
④ Search: It is the record search shortcut menu. Please refer to chapter4.5 for detailed
information.
⑤ Alarm status: Click it to go to the alarm status interface to set alarm information of current
channel.
⑥ Network status: It is the network setup shortcut button. Please refer to chapter4.7.5 for