IC Realtime 8/16/32 Channel 1.5U 8/16 PoE Network Video Recorder - Manual (Page 37)

29
z Holiday setting: Click it you can see an interface shown as in Figure 4-24. Here you can set
holiday date. Please go to the Holidays Period interface to set the holiday date record setup.
—
When you enable Holiday settings and schedule setup at the same time, holiday setting
has the priority. If the selected day is a holiday, then system records as you set in holiday
setting. If it is not a holiday, system records as you set in Schedule interface. Please note
you need to go to chapter 4.6.3 Schedule to enable Holiday setup. Otherwise you can not
enable holiday record setup.
— Please note, there is no year setup on the holiday setting. For example, if you set 30th
Oct, 2012 as a holiday, then the date of 30th Oct in each year will be set as a holiday. So,
general speaking, your holiday setup in other year may also affect the holiday setup in
2012.
z Mouse property: Click mouse setup button, you can go to mouse setup interface. See Figure
4-25. You can set double click speed via dragging the slide bard. You can Click Default
button to restore default setup.
z Startup wizard: Once you check the box here, system will go to the startup wizard directly
when the system restarts the next time. Otherwise, it will go to the login interface.
z Auto logout: Here is for you to set auto logout interval once login user remains inactive for a
specified time. Value ranges from 0 to 60 minutes.
z Navigation bar: Check the box here, system displays the navigation bar on the interface.
z IPC Time Sync: You can input an interval here to synchronize the NVR time and IPC time.
z Snap times: Here you can set snap picture amount of one click.
Note:
Since system time is very important, do not modify time casually unless there is a must!
Before your time modification, please stop record operation first!
After completing all the setups please click save button, system goes back to the previous menu.
Figure 4-21