IC Realtime 8/16/32 Channel 1.5U 8/16 PoE Network Video Recorder - Manual (Page 23)

15
record of current channel.
Please go to the Main Menu->General to set
real-time playback time.
System may pop up a dialogue box if there is no
such record in current channel.
2 Digital zoom
It is to zoom in specified zone of current channel.
It supports zoom in function of multiple-channel.
The selected area has an icon as and the
free area is shown as an icon as .
3
Real-time backup
function
It is to backup the video of current channel to the
USB2.0 device. System can not backup the
video of multiple-channel at the same time.
Current selected backup channel has an icon as
and the free channel is shown as an icon
as .
Once the backup started, you can see the free
channel is shown as an icon as .
4 Manual Snap Click it to snap manually.
5
Remote device add
shortcut It is to go to the remote device connection
interface.
6 Bidirectional talk
Support bidirectional talk function with the
front-end device.
7 Exit
Playback control
The playback control has the following features.
z
Support play, pause, and exit and drag function.
z During the preview playback process, you can not see the channel title and record status
of current channel. It will display the channel title and the record status once you exit the
preview playback.
z During the preview playback, you can not switch the displayed channel or change current
window-display mode.
z Please note, the tour function has the higher priority than the preview playback. System
automatically exits the preview playback function and its corresponding interface when
the tour function started. You can not control the preview playback until the tour function
ended.
4.2 Right Click Menu