Heli-Max HMXE01 - Manual (Page 3)

❏
2. Remove the battery cover from the back of the
transmitter. Install eight “AA” batteries (not included) in the
transmitter. Double-check the direction of each battery
before replacing the battery cover.
❏
3. Turn on the transmitter and check the LEDs on the
front. The green and red lights should be on. If the green
light is off and the red light is blinking, new “AA” batteries
need to be installed.
❏
1. Rotate the main blades so that they are pointing away
from each other and perpendicular to the flybar. Note:
Later, when you first fly your helicopter, if it has any
vibrations or shakes this is the first thing to check.
❏
2. Slide a skid mount onto each training gear leg.
❏
3. Install the gear legs in the center mount. Note that angle
A is larger than angle B. The larger angle A faces forward.
❏
4. Snap the training gear onto the landing gear skids.
PREPARE THE HELICOPTER
FOR FLIGHT
3