Heli-Max HMXG8016 - Manual (Page 4)

MOTOR DIRECTION CHECK MOTOR DIRECTION CHECK
❏
Ensure that all of the wires are clear of rotating components and make
sure that none of the wires can become entangled in the rotating components.
Connect the fl ight battery to the ESC and turn the transmitter on with the throttle
in the lowest position. Once the transmitter and receiver have been linked, place
the helicopter on the ground at least 15ft away. Slowly add throttle and verify
that the main rotor blades are rotating in the correct direction. If the main rotor
blades are rotating backwards, then disconnect motor harness from the ESC
and simply rotate the harness 180° and reconnect. This will reverse the rotation
of the main drive motor.
❏
Place the canopy back onto the model and the brushless upgrade is now
complete. No additional settings or changes are needed before fl ight. Enjoy
fl ying your brushless Heli-Max™ Novus FP.
HAPPY FLYING! HAPPY FLYING!
Entire Contents © Copyright 2009 HMXG8016 Mnl v1.0