Heli-Max HMXE0805 Manual - Manual (Page 18)

18
REPLACING THE TAIL SHAFT AND TAIL ROTOR
❏ Use a flat blade screw
driver to carefully pry the
tail rotor from the tail rotor
shaft. Slide the tail drive
gear off of the shaft. Slide
the tail rotor shaft out the
opposite side of the tail
rotor case. Slide the new
tail rotor shaft into the tail
rotor housing. Slide the tail
drive gear onto the shaft
(the step faces inward) and
press the tail rotor onto the
shaft, ensuring that the two
protrusions on the tail rotor line up properly with the tail drive gear.