Haltech E6K - Manual (Page 85)

79
connected on the single channel. This minimises the
amount of outputs needed to run this engine configuration.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window
may be opened by pressing
¦H ¦H ¦H ¦H
. This will describe the function you are currently looking
at, and offer some explanation as to how its parameters are to be used.
13.2 The Output Options Page
The Output Options Page is where all E6K options are enabled/disabled and programmed.
This page may be accessed in either ONLINE or OFFLINE mode. Remember that any
changes you make in OFFLINE mode will not affect the ECU.
Pressing
¦o ¦o ¦o ¦o
will take you to the Options Menu. Press
O O O O
to go to the Output Options
Page. Alternatively use the
§o §o §o §o
hot key combination
Here, the E6K Idle Air Control and Closed Loop Control options as well as up to 2 Digital
Outputs (depending on engine configuration) are shown in four windows. Current settings are
displayed for each of the options. Use the left and right arrow keys to highlight the function
you are interested in. In the case of selecting the Digital Outputs, use
© © © ©
to cycle through the
functions, and press
¬ ¬ ¬ ¬
to select the one you want. Some options cannot be used together
because they use the same hardware. These are noted in the detailed descriptions in Chapter
16. Other restrictions apply when using the Advanced Mode. If you are using this mode,
consult Appendix B for details on these restrictions.
To adjust the parameters of the Idle Speed Control or the Closed Loop Control functions, hit
¬ ¬ ¬ ¬
when that function is highlighted. In the case of the two Digital Outputs, highlight the
channel, then use the up and down arrows to move through its parameters. Strike
¬ ¬ ¬ ¬
if you
wish to make a change. Some functions have maps associated with them, which are accessed
through their Options' windows.
A keystroke guide is available at the bottom of the screen. Further, a simple Help window
may be opened by pressing
¦H ¦H ¦H ¦H
. This will describe the function you are currently looking
at, and offer some explanation as to how its parameters are to be used.
13.3 The PWM Options Page
The PWM Options Page is where all E6K PWM options are enabled/disabled and
programmed. This page may be accessed in either ONLINE or OFFLINE mode. Remember
that any changes you make in OFFLINE mode will not affect the ECU.
Pressing
¦o ¦o ¦o ¦o
will take you to the Options Menu. Press
W W W W
to go to the Output Options
Page. Alternatively use the
§W §W §W §W
hot key combination
Here, the four E6K PWM options are shown in four windows. Current settings are displayed
for each of the options. Use the left and right arrow keys to highlight the function you are