Haltech E6K - Manual (Page 66)

60
This bar has a height of –25.9%, so the E6K will provide an enrichment of –25.9%. Changing
the pressure value that is locked in as Barometric Pressure Lock will obviously move the
corresponding bar on the Barometric Compensation Map. Once the bar is highlighted you can
elect to use the height of the bar as it already is or you can change the height of the bar by
using the up and down arrow keys, exactly the same as you would when tuning the
fuel/ignition maps. This will of course change the enrichment % used by the E6K.
Note: The bar height should only be adjusted if your environment requires it.
Reducing the fuel enrichment may cause your engine to run lean and damage
will occur. Only adjust the height of the bar if you are confident in what you
are doing and have sufficient knowledge about your engine and the
environment in which it is operated.