GTCO CR 1212 - Users Guide - Manual (Page 7)

CR 1212 7
Chapter 2: Assembly and Installation
The CR 1212 package should include the following:
 Tablet
 Stylus or cursor
 Interface cable
 CR 1212 Graphics Tablet User’s Guide
To assemble and install CR 1212:
1. Connect the stylus/cursor to the tablet.
2. Attach the tablet to the host and power source.
3. Turn on the tablet.
NOTE: Always have the computer and tablet power off when attaching or detaching any
part of the CR 1212. If the power is on, nothing serious happens to the CR 1212, but it
could have the potential to corrupt the file being worked on or cause the computer to
malfunction.
Installing CR 1212 Graphics Tablet
1. Plug the stylus/cursor into the phone socket on the right-hand edge of the tablet.