GTCO 2500 Series - Users Guide 1/3 - Manual (Page 20)

2500 Series 20
Switch Controlled Parameters
The following operating characteristics are controlled by the settings of the soft switch
banks. The settings are listed on the page given after the bank number. Parameters which
were too complex to explain with a brief phrase have a thorough explanation on the page
given after this brief explanation.
BANK ONE
Effectivity Soft switch settings may be made effective immediately, on reset or
for the current session only.
Indicator Select tablet status or user defined LED indicators.
Operating Mode Select operating mode.
BANK TWO
Commands Enable or disable 2000 and 9100 style commands.
Data Rate Set data rate from 1 to 125 points per second.
Line Feed Enable or disable line feed.
Proximity Enable or disable out-of-proximity data.
Margin Data Enable or disable margin data.
BANK THREE
Resolution Set resolution (200 to 1000 lines per inch (lpi) or 10 to 100 lines per
millimeter (lpmm).
Format Select output format 0-31.
BANK FOUR
RS-232 Setup Baud rate, data and stop bits and parity.