GTCO 2500 Series - Users Guide 1/3 - Manual (Page 10)

2500 Series 10
Switches and Indicators
The Tablet-Status Display blocks across the top of the tablet have multiple functions. In
operating mode, the numbered indicators light to inform the operator of the tablet’s
activities. In self-test mode, the lights indicate which test failed. In set-up mode, the blocks
become “switches” that are used to set operating parameters. The indicators may be used
by some programs to indicate special functions.
The functions of the blocks when the tablet is in operating mode are as follows:
Transducer
Lights when a cursor button is pushed or the stylus tip is depressed.
User-1 Lit and extinguished as a user defined indicator by software
command.
User-2 Lit and extinguished as a user defined indicator by software
command.
Proximity Lights when the transducer is out of proximity.
Transmit Flashes during any transmission from the tablet to the host.
Receive Flashes once for each character received from the host.