Great Planes Escapade ARF - GPMA1105 - Manual (Page 19)

❏
1. Cut the slots in the wing for the wing struts.
❏
2. Glue the 1/32" plywood wing braces (6) into the
indentations on the top of the wing.
❏
3. Use a felt-tip pen to mark the center of the aft edge of
the opening in the wing. Place the wing on your workbench
resting on its trailing edge. Use a small builder's square to
mark a centerline on the wing from the mark you made
down to the TE.
Assemble the Wing
19