beautypg.com

Great Planes Escapade ARF - GPMA1105 User Manual

Page 13

background image

6. Glue the control horns into the slots. Be certain the

elevator control horn is on the bottom and the rudder
control horn is on the left (the stab and elevator are shown
upside-down in the photo). Also be certain the control horns
are facing forward.

7. Use epoxy to glue the fin to the stab. Use a small

builder's square to get the fin perpendicular to the stab, then
use tape or small T-pins to hold them together until the
epoxy hardens.

13