beautypg.com

Great Planes Super Stearman 1.20 ARF - GPMA1350 User Manual

Page 33

background image

❏ ❏

9. Put a small drop of CA on the cord, then insert it into

the hole shown.

❏ ❏

10. Bring the elastic cord around the top of the forward

strut and pull it back toward the fuselage. Glue the cord into
the hole next to the hole you started with

11. Repeat this process for the rear strut.

❏ ❏

12. Cut two elastic cords 25" [635mm] long. Use CA to

glue the ends together forming a loop. When gluing the ends
together, overlap the cord approximately 1/2" [13mm].

❏ ❏

13. Remove the screws from the top cabanes, install

the cord around the cabane and then re-install the screws.
Do this on the bottom of the wing struts as well.

33