beautypg.com

Using the sbb aqua plus, Bath controls, Indicator lamps – Grant Instruments SBB Aqua Plus User Manual

Page 14: Setting a controlled boil, Setting the constant level device

background image

29825 Ver. 2 - July 2010 71W

SUB, JB & SBB Aqua Plus

Page 13

Operating Manual

www.grant.co.uk

5.4

Using the SBB Aqua Plus


5.4.1 Bath controls


5.4.2 Indicator lamps

There are three indicator lights:
1. Power on (green).
2. Heater on (orange). Marked

.

3. Warning (orange). Marked indicates that one or both over temperature cut outs

have tripped.

5.4.3 Setting a controlled boil

The bath can be set to boil continuously.

1. Turn the energy control knob to the maximum position.
2. When the water is boiling, reduce the power by turning the knob to a position that

maintains the boiling at the desired level.


5.4.4 Setting the constant level device

A constant level device is fitted to the bath to maintain the required water level. To use
the constant level device, connect the inlet pipe (black) to a water supply and the outlet
pipe (white) to a drain. The water level can be adjusted by loosening the lower black nut
and raising or lowering the white tube. The position of the top of the tube determines the
water level. Re-tighten the black nut.

Constant level

device

Power on light

Heater on light

Energy control

Over temperature

warning light

Fixed over

temperature

cut-out devices

This manual is related to the following products: