Golden Lighting 9903-M1L MG - Manual (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.
CSA055304DALG2.DOC
PARTS & ASSEMBLY SHEET
This fixture assembled PO: Date:
Fixture Name: AUTUMN TWILIGHT 9903-M1L MG
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:______________________Co Account#:__________
below to be filled out by retailer
Canopy
1ea Φ135*H55 ㎜
Hex Nut
2ea NPS-1/4-18
Wire Connectors
3ea Orange
Chain
1ea Φ3.8*6ft
Nipple
1ea NPS 1/4-18*75 ㎜
Canopy Loop
1ea NPS 1/4-18*H41 ㎜
Link
2ea W20*H45 ㎜
Mounting Strap
1ea W103*T2.0 ㎜
Mounting Screws
2ea G8/32*H32 ㎜
Crystal Leaf
(PT-CRYSTAL-9903 LEAF)
9ea W27*H65 ㎜
Bulbs
4ea Halogen,
Type G4 10W
Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments __________________________________________________________________________
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture
9903-M1L MG
Fig.3
1. Open bag on the arm and carefully arrange the
bead strings.
2. Screw Crystal Leaf (A) on the arm.
Hold carefully by the metal base to prevent the
crystal from cracking.
3. Install the light bulbs in accordance with the
fixture's specification.
Bulb note: Use a tissue or paper towel to hold the
bulb and push down into socket. Oils or dirt can
cause the bulb life to shorten. Rubbing alcohol is
recommended to clean the bulbs if dirty
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
A
4 PCS 4 PCS 3 PCS 4 PCS 3 PCS