Golden Lighting 9903-BA1 - Manual (Page 2)

PARTS & ASSEMBLY SHEET
Fixture Name: AUTUMN TWILIGHT 9903-BA1
This fixture assembled PO: Date:
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:______________________Co Account#:__________
below to be filled out by retailer
Mounting Strap Green Screw Mounting Screws
Φ 102 ㎜ 1ea G8/32*H8 ㎜ 1ea H32 ㎜ 2ea H38 ㎜ 2ea
Wire Connectors Hex Nut Deco Nut
Orange 3ea G5/32*H4 ㎜ 2ea Φ 12 ㎜ 2ea
Crystal Leaf Bulbs
PT-CRYSTAL-9903 LEAF 1ea Halogen,
5ea W27*H65 ㎜ Type G9 40W
Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture
1. Open the bag that is attached to the fixture and
carefully arrange the bead strings.
2. Screw Crystal Leaf (A) on the arm.
Hold carefully by the metal base to prevent the
crystal from cracking.
3. Place the Glass (C) and Piece (D) over the Socket
(B) and secure with Socket Ring (E).
4. Install the light bulbs in accordance with the
fixture's specification.
Bulb note: Use a tissue or paper towel to hold the
bulb and push down into socket. Oils or dirt can
cause the bulb life to shorten. Rubbing alcohol is
recommended to clean the bulbs if dirty.
(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)
NOTE: INSTALL THE GLASS ASSEMBLY
AFTER FIXTURE IS HUNG.
9903-BA1
Fig.1
E
D
C
B
A
For Customer Service, contact the place of purchase to arrange for replacement parts.
CS A 0 5 5 3 0 1 WB LG 1