Golden Lighting 9903-5P MSI - Manual (Page 2)

PARTS & ASSEMBLY SHEET
Fixture Name: AUTUMN TWILIGHT 9903-5P
This fixture assembled PO: Date:
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:______________________Co Account#:__________
below to be filled out by retailer
Canopy Hex Nut Wire Connectors
1ea Φ175*H68 ㎜ 2ea NPS-1/4-18 3ea Orange
Chain Nipple Canopy Loop
1ea Φ3.8*6ft 1ea NPS 1/4-18*90 ㎜ 1ea NPS 1/4-18*H41 ㎜
Link Mounting Strap Mounting Screws
2ea W19*H54 ㎜ 1ea W103*T2.0 ㎜ 2ea G8/32*H32 ㎜
Crystal Leaf
Bulbs
(PT-CRYSTAL-9903 LEAF) 5ea Halogen,
75ea W27*H65 ㎜ Type G4 20W
Part Needed ______________________________ Quantity _________________________________
Part Needed ______________________________ Quantity _________________________________
Reason why (missing, scratched, broken glass, bent, bad finish)
Comments
FIXTURE ASSEMBLY INSTRUCTIONS
Read and review installation instruction sheet
before assembling the fixture
1. Open bag on the arm and carefully arrange the
bead strings.
2. Screw Crystal Leaf (A) on the arm. See the attached
Crystal installation diagram. Hold carefully by the
metal base to prevent the crystal from cracking.
3. Install the light bulbs in accordance with the
fixture's specification.
Bulb note: Use a tissue or paper towel to hold the
bulb and push down into socket. Oils or dirt can
cause the bulb life to shorten. Rubbing alcohol is
recommended to clean the bulbs if dirty.
9903-5P
Fig.3
A
For Customer Service, contact the place of purchase to arrange for replacement parts.
CS A 0 5 5 3 0 5 D ALG 1