Golden Lighting 9106-M3 PW-OPL - Manual (Page 2)

9106 PartsInstallation-121208.xls
For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
continued
Fixture Name: Taylor 9106-M3 PW
G
H
I
J
F
3. Pull the fixture’s wire through the Rods.
4. Thread Rod (J) into Frame (K) until tight.
5. Thread Rod (I) into Rod (J) until tight. repeat for
any additional rods.
6. Feed the fixture wires through the Canopy (G) and
pull the wires until taut.
7. Thread Canopy (G) into Rod (H) until tight.
* You may now install the fixture.
Note: Complete these remaining steps after the
fixture is hung.
8. Slide the Metal candle sleeve (L) over Socket (M)
and put the Shade (N) on the sleeve.
*Shade will be secured by the light bulb.
9. After installing all the components adjust the
fixture's arms spacing for even balance.
9. Install the light bulbs in accordance with the
fixture's specification.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
N
L
M
K