Golden Lighting 8981-M1L GRM - Manual (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.
PARTS & ASSEMBLY SHEET
Fixture Name: Echelon 8981-M1L BRI / GRM
4. Pull the fixture’s wire through the Rods.
5. Thread Rod (F) into Frame at (H) until tight.
6. Thread Rod (D) into Rod (F) until tight. repeat for any
additional rods.
7. Feed the fixture wires through the Top loop (A) and pull
the wires until taut.
8. Thread Top loop (A) into Rod (C) until tight.
9. By measuring determine correct number of links needed
for proper hanging height. Use a pair of pliers to open one
link of the Chain then remove the excess Chain and
discard it.
10. Use one chain connector (A12) to attach one end of
the chain to the Top loop (A) and close the chain
connector.
11. Feed the fixture wires through the Chain (every three
links) and pull the wires until taut.
.
Fig 2
12. Slip Canopy loop collar (A11) over the Chain, then do
the same with the canopy (A9).
13. When ready to complete the installation Use the other
chain connector and attach the other end of the chain to
the canopy loop (A10) and close the chain connector.
14. Make sure the weight of the chandelier is supported by
the chain-not the electrical wire.
* You may now install the fixture.
15. Place the Fabric shade (P) over the threaded socket
(L) and secure in place by threading the ring (M) and
Socket ring (N) on until tight. Then attach Crystal draping
(J) to hook (O) of shade.
16. Install the light bulb in accordance with the fixture’s
specifications.
(DO NOT EXCEED MAXIMUM WATTAGE RATING!)
expanded view of assembly
T
G
CHAIN
J
H
F
E
C
A
A11
A9
A12
A10
A12