Installation instructions – Golden Lighting 8981-BA3 BRI User Manual

Page 2

For Customer Service, contact the place of purchase to arrange for replacement parts.

Fig. 3

Fig. 1

Fig. 2

HANGING THE FIXTURE (Fig.1)

1.Carefully remove the new fixture from the carton and the

yellow bag that holes all your parts. Check that all parts are

included as shown in the illustration and parts list.

2. Shut off power at the circuit breaker and remove the old

fixture from wall, including the old mounting strap.

3. The Mounting Strap (B) contains several pairs of threaded

holes, find the pair of holes that match the holes spacing in

your fixture Back Plate (E) and thread the two Fixture

Mounting Screws (C) half way into the Fixture Mounting Strap

(B).

4. Place the Mounting Strap (B) over the Junction Box so the

Fixture Mounting Screws(C) are vertical or horizontal, as

required by the fixture type.

5. Attach the Fixture Mounting Strap (B) to the Junction Box

using the two mounting screws (A). Tighten the screws (A)

securely with screwdriver.

CONNECTING THE WIRES (Fig 2)

6. Attach the power supply wires to the fixture lead wires by

connecting BLACK to BLACK (or SMOOTH) and WHITE to

WHITE (or RIBBED).

7. Attach the GROUND wire(GREEN or COPPER) from the

Junction Box and the fixture Ground wire to the green Ground

Screw on the Mounting Bracket (B) or connect both wires

together using the correct size of wire connectors.

NOTE: Twist the wires together in the same direction you twist

the wire connector onto the wires.

8. Tuck these wire connections neatly into the Junction Box.

FINISHING THE INSTALLATION (Fig.3)

9. Place the fixture Back Plate (E) over the two Mounting

Screws (C) and secure the Back Plate (E) against the wall by

threading two Deco nuts (F) over the two Mounting Screws (C)

until tight as shown on Fig.1

10. Install glass as per the fixture assembly instructions.

YOUR INSTALLATION IS NOW COMPLETE. RETURN

POWER TO THE JUNCTION BOX AND TEST THE

FIXTURE.

For Wall Mount Light Fixture

INSTALLATION INSTRUCTIONS

WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.

Fixture Name:

Echelon 8981-BA3 BRI / GRM