Golden Lighting 8118-BA3 BUS - Manual

8118-BA3 BUSPartsInstallation_20120330m.xlsx
2ea ∅1-1/2"*H5mm 2ea 5/32-IP*H45mm 2ea ∅1-1/2"*H32mm
2ea ∅3/4"*H34mm
Part Needed Quantity
Part Needed Quantity
Reason why ( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
F IXTURE A SSEMBLY I NSTRUCTIONS
Read and review installation instruction sheet, but
do not install before assembling the fixture.
8118-BA3 BUS
1. Thread Nipple (R) onto end of fixture bar. Put Cap
(S), then Crystal Ball (T) onto Nipple (R) and secure with
Finial (U).
2. Repeat for other side.
3. Slide the Glass Shade (J) over Socket ( I). Secure
Glass Shade (J) by threading the Socket Ring (O) onto
Socket (I) until tight.
4. Install the light bulb in accordance with the fixture's
specifications.
DO NOT EXCEED MAXIMUM WATTAGE RATING!
Fig 1
NOTE: I NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
Cap Nipple
Crystal ball
Finial
Wire connectors Mounting Screws Hex Nut
3ea P3 Orange 2ea 5/32-IP*7/8" 2ea 5/32-IP*H3mm
Mounting Strap Mounting Screws Deco Nut
1ea ∅4"*H2mm 2ea 8#32-IP*1" 2ea 5/32-IP*H9mm
PARTS LIST Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
Fixture Name: Alston Place 8118-BA3 BUS
This fixture assembled PO:__________ Date: ________
Notice: Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing
or damaged, please note on this sheet and contact the place of purchase to arrange for replacement parts.