Golden Lighting 8118-6 BUS User Manual
Parts & assembly sheet, Parts list

1ea D 5-3/4"*H1-1/2"
2ea 8#32-IP*1"
1ea 1/8-IP*H60mm
1ea 6ft 3.8mm
3ea P3 Orange
1ea 1/4-IP*H60mm
2ea 5.8*H61mm
1ea 1-1/8"*H42mm
1ea W4-1/8"*E1"*H5mm
1ea D 1-1/2"*H5mm
1ea D2-1/4"*H42mm
1ea 1-1/2"*H5mm
1ea D1-1/4"*H49mm
1ea 1/8-IP*H55mm
1ea 4"*H473mm
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
Finial
Nipple
Center column
Chain connector
Canopy loop
with Collar
Mounting strap
Chain
Bottom cap (T)
Crystal ball
Bottom cap (W)
This fixture assembled PO:__________ Date: ________
PARTS & ASSEMBLY SHEET
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or damaged,
please note on this sheet and contact the place of purchase to arrange for replacement parts.
Fixture Name: Alston Place 8118-6 BUS
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
Canopy
Mounting Screws
Top loop
ASSEMBLING THE FIXTURE (Fig.1)
1. Thread the Center Column (L1) to connector (R) till tight.
2. Feed the fixture wires through the Top loop (J) and pull the
wires until taut.
3. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
Fig 1
NOTE: I
NSTALL THE GLASS ASSEMBLY AFTER
THE FIXTURE IS HUNG.
Read and review installation instruction sheet before
assembling the fixture.
8118-6 BUS
Wire connectors
Nipple
For Customer Service, contact the place of purchase to arrange for replacement parts.
8118-6PartsInstallation_10032011m.xls