Golden Lighting 8106-BA2 CDB - Manual (Page 2)

For Customer Service, contact the place of purchase to arrange for replacement parts.
HANGING THE FIXTURE(Fig.1)
1.Carefully remove the new fixture from the
carton and the yellow bag that holes all your
parts. Check that all parts are included as shown
in the illustration and parts list.
2. Shut off power at the circuit breaker and
remove the old fixture from wall, including the old
mounting strap.
3.The Mounting Strap(A) contains several pairs
of threaded holes, find the pair of holes that
match the holes spacing in your fixture Back
Plate(D) and thread the two Mounting Screws(C)
half way into the Mounting Strap(A).
4.Place the Mounting Strap(A)over the Junction
Box so the Mounting Screws(C) are vertical or
horizontal, as required by fixture type.
5.Attach the Mounting Strap(A) to the Junction
Box using the two mounting screws(B). Tighten
the screws(B) securely with screw driver.
CONNECTING THE WIRES (Fig 2)
6. Attach the power supply wires to the fixture
lead wires by connecting BLACK to BLACK (or
SMOOTH) and WHITE to WHITE (or RIBBED).
7. Attach the GROUND wire(GREEN or
COPPER) from the Junction Box and the fixture
Ground wire to the green Ground Screw on the
Mounting Bracket (B) or connect both wires
together using the correct size of wire
connectors. -
NOTE:Twist the wires together in the same
direction you twist the wire connector onto the
wires.
8. Tuck these wire connections neatly into the
Junction Box.
FINISHING THE INSTALLATION(Fig.3)
9. After tucking these wire connections neatly
into the Junction Box and place the fixture Back
Plate(D) over the two Mounting Screws(C) and
secure the Back Plate(D) against the wall by
threading two Deco Nuts(E) over the two
Mounting Screws(C) until tight as shown on
Fig.1.
YOUR INSTALLATION IS NOW COMPLETE.
RETURN POWER TO THE JUNCTION BOX AND
TEST THE FIXTURE.
Fig. 3
Fig. 1
Fig. 2
For Wall Mount Light Fixture
INSTALLATION INSTRUCTIONS
WARNING ! SHUT OFF POWER AT FUSE OR CIRCUIT BREAKER.
Fixture Name: Torbellino 8106-BA2 CDB
JUNCTION BOX
B
A C
D E
D E