Golden Lighting 8063-363 BUS User Manual
Parts & assembly sheet, Parts list

Canopy
1ea
Mounting
Screws
2ea
Canopy loop 1ea
Chain
6ft
Threaded ring
1ea
Bottom cap,
small
2ea
Chain
connector
2ea
Canopy Loop
Collar
1ea
Nipple-A
Nipple-B
1ea
Mounting
Strap Hvy
1ea
Hex Nut
3ea
Bottom
assembly
1ea
Mounting
screws
2ea
Wire
connectors
2ea
Finial
1ea
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
PARTS & ASSEMBLY SHEET
This fixture assembled PO:__________ Date: ________
Fixture Name: Heartwood 8063-363 BUS
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If
any parts are missing or damaged, please note onthis sheet and contact the place of purchase
to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_________
to be filled out by retailer
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
For Customer Service, contact the place of purchase to arrange for replacement parts.
NOTE: I
NSTALL THE GLASS ASSEMBLY
AFTER THE FIXTURE IS HUNG.
ASSEMBLING THE FIXTURE (Fig.1)
1. Feed the fixture wires through the Top loop
(J) and pull the wires until taut.
2.Then screw the Top Loop (J) to the threaded
center column of Frame (M) until tight.
8063-363 BUS
Read and review installation instruction sheet,
but do not install before assembling the fixture.
Fig 1