Parts & assembly sheet, Parts list – Golden Lighting 8063-1W BUS User Manual

Page 2

Mounting Strap

1ea

Mounting
Screws

4ea

Deco Nut

2ea

Hex nut

2ea

Wire
connectors

2ea

Green Screw

1ea

Part Needed

Quantity

Part Needed

Quantity

Reason why

( missing, scratched, broken glass, bent, bad finish)

Comments

8063-1W BUS

Read and review installation instruction sheet
before assembling the fixture.

IXTURE

SSEMBLY

NSTRUCTIONS

For Customer Service, contact the place of purchase to arrange for replacement parts.

NOTE: I

NSTALL THE GLASS ASSEMBLY

AFTER THE FIXTURE IS HUNG.

1. Place the fixture Back Plate ( S ), over the
threaded rod, so it protrude through the
hole in the Back Plate ( S ).
2. Thread the Deco Nut ( O ) onto the threaded
rod and continue turning until the Back Plate(J)
is snug against the wall .
3. Place the Glass Shade (Q) over the Threaded
Socket (R)
4. Holding the Glass Shade ( Q ), and secure it by
threading the Socket Ring ( P ) onto the Threaded
Socket ( R ) until tight .
5. Install the light bulbs in accordance with the
fixture's specification .

(DO NOT EXCEED THE MAXIMUM WATTAGE RATING!)

Fig. 4

Notice:

Please review the parts listing and check for all parts before assembling the fixture. If any

parts are missing or damaged, please note onthis sheet and contact the place of purchase to arrange
for replacement parts.

PARTS LIST

Company Name:_______________________Co. Account #:__________
to be filled out by retailer

PARTS & ASSEMBLY SHEET

This fixture assembled PO:__________ Date: ________

Fixture Name: Heartwood 8063-1W BUS