Golden Lighting 7644-M3 GA User Manual
Parts & assembly sheet, Parts list
![background image](/manuals/677925/1/background.png)
7644-M3 GA PartsInstallation_20120406m(ok)
Canopy
Wire Connectors
Top Loop
1ea @5-5/8"X1-5/8"
3ea P4 Orange
1ea @3/8 x 50mm
Chain
Junction Box
Screw
Spring Washer
1ea 6ft x3.8mm
2ea 8/32" x 1"
1ea @15 x 2mm
Chain Connector
Nipple
2ea @3X38mm
1ea @3/8 x 40mm x 5mm
1ea @3/8 x 65mm
Mounting Strap
w/ ground screw
Hex Nut
1ea 3/4"X4"
2ea @3/8 x 3mm
3 pcs
Part Needed
Quantity
Part Needed
Quantity
Reason why
( missing, scratched, broken glass, bent, bad finish)
Comments
For Customer Service, contact the place of purchase to arrange for replacement parts.
ASSEMBLING THE FIXTURE (Fig. 1)
1. Feed the fixture wires through the Top loop (J) and pull
the wires until taut.
2. Then screw the Top Loop (J) to the threaded center
column of Frame (M) until tight.
3. Gently spread the arms until evenly spaced if arms are
packed closed.
Notice:
Please review the parts listing and check for all parts before assembling the fixture. If any parts are missing or
damaged, please note onthis sheet and contact the place of purchase to arrange for replacement parts.
PARTS LIST
Company Name:_______________________Co. Account #:_____________
to be filled out by retailer
PARTS & ASSEMBLY SHEET
7644-M3 GA
Read and review installation instruction sheet before
assembling the fixture.
F
IXTURE
A
SSEMBLY
I
NSTRUCTIONS
This fixture assembled PO:__________ Date: ________
Fixture Name: Mirabella 7644-M3 GA
Canopy Loop
with Collar
Decorative Chain
(CRYSET-7644-M3)
Fig. 1
NOTE: INSTALL THE SHADE ASSEMBLY AFTER THE
FIXTURE IS HUNG.
Bulb
(Not Provided)
M